Tel:
Baoji Ruixin Energy Equipment Co.,Ltd
Baoji Ruixin Energy Equipment Co.,Ltd

Innovation Excellence

Home ProductsWireline Pulling Tool

2.5″ Wireline Pulling Tool GR Pulling Tool SR Connection

2.5″ Wireline Pulling Tool GR Pulling Tool SR Connection

  • 2.5″ Wireline Pulling Tool GR Pulling Tool SR Connection
2.5″ Wireline Pulling Tool GR Pulling Tool SR Connection
Product Details:
Place of Origin: China Baoji
Brand Name: Ruixin
Certification: API Q1
Model Number: 2inch 2.5inch 3inch 3.5inch
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Wooden Box
Delivery Time: 2-4 weeks
Payment Terms: T/T, Western Union
Supply Ability: 1 set 2 weeks
Contact Now
Detailed Product Description
Name: GR Pulling Tool Wireline Pulling Tool Size: 2inch 2.5inch 3inch 3.5inch 4inch 5inch
Material: Alloy Steel&Nickel Alloy Fish Neck: 1.375inch 1.75inch 2.313inch 3.125inch
Actual OD: 1.81inch~ Fishing OD: 1.375inch~2.61inch
Connection: SR,QLS,BLQJ,HDQRJ
High Light:

Wireline GR Pulling Tool

,

SR Connection GR Pulling Tool

,

GR Type Wireline Pulling Tool

GR Pulling Tool Wireline Pulling Tool

I. Overview:
GR type fishing tool is composed of GU joint (upward shear joint) and GS type fishing tool (without shear pin), which can be released by upward shearing. It is usually used to salvage lock cores, packers and bridge plugs with internal salvage necks.
 

II. Technical parameters of common specifications:

Szie Actual OD FN Fishing OD Connection Lower connection thread
2″ 1.81″ 1.375″ 1.38″ 15/16″-10UN 1/2-13UN″
2.5″ 2.25″ 1.375″ 1.81″ 15/16″-10UN 5/8-11UN″
3″ 2.72″ 1.75″ 2.31″ 1-1/16″-10UN 5/8-11UN″
3.5″ 3.11″ 2.313″ 2.62″ 1-1/16″-10UN 5/8-11UN″

Technical parameters can also be according to user requirements

III. Structural features:
GR type fishing tool is mainly composed of GU joint and GS type fishing tool (upper joint may not be included), etc., as shown in the attached assembly drawing.
During fishing operation (refer to the GS assembly drawing), when the fishing claw touches the end of the inner fishing neck, it will fall back to a slightly smaller diameter of the core and retract; when the fishing paw fully enters the inner fishing neck, the thrust of the auxiliary spring is compressed Down, the fishing claw immediately opened to catch it. When the tool is blocked upwards, it can be shaken and released.
IV, maintenance:
1. After the tool is disassembled, check the damage of each part and replace the damaged parts.
2. When assembling, a thin layer of grease should be applied to the thread surface.
3. After assembling, put the protective wire on the thread of the salvage neck connection and mark it for later use.

Welcome to contact us at any time.

2.5″ Wireline Pulling Tool GR Pulling Tool SR Connection 0

Contact Details
Baoji Ruixin Energy Equipment Co.,Ltd

Contact Person: Selina Qiang

Tel: 86 13571793445

Send your inquiry directly to us
Baoji Ruixin Energy Equipment Co.,Ltd
401B, High-end Equipment Industrial Park, Baoji High-tech Development Zone, Shaanxi Province
Tel:86-29-89299016
Mobile Site Privacy Policy China Good Quality Wireline Tool String Supplier. © 2021 - 2022 rxwirelinetools.com. All Rights Reserved.