Tel:
Baoji Ruixin Energy Equipment Co.,Ltd
Baoji Ruixin Energy Equipment Co.,Ltd

Innovation Excellence

Home ProductsWireline Pulling Tool

Alloy Steel Wireline GR Pulling Tool QLS BLQJ Connection

Alloy Steel Wireline GR Pulling Tool QLS BLQJ Connection

  • Alloy Steel Wireline GR Pulling Tool QLS BLQJ Connection
Alloy Steel Wireline GR Pulling Tool QLS BLQJ Connection
Product Details:
Place of Origin: China Baoji
Brand Name: Ruixin
Certification: API Q1
Model Number: 2inch 2.5inch 3inch 3.5inch
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Wooden Box
Delivery Time: 2-4weeks
Payment Terms: T/T, Western Union
Contact Now
Detailed Product Description
Name: GR Pulling Tool Wireline Pulling Tool Material: Alloy Steel&Nickel Alloy
Size: 2inch 2.5inch 3inch 3.5inch 4inch 5inch Fish Neck: 1.375inch 1.75inch 2.313inch 3.125inch
Actual OD: 1.81inch~ Fishing OD: 1.375inch~2.61inch
Connection: SR,QLS,BLQJ,HDQRJ
High Light:

Wireline GR Pulling Tool

,

Alloy Steel GR Pulling Tool

,

slickline GR Pulling Tool

Alloy Steel Wireline GR Pulling Tool QLS BLQJ Connection

Ⅰ. Introduction

GR pulling tool is composed of GU shear up adaptor (upward shear adaptor) and GS pulling

tool (without shear pin), which can be released by upward shear. It is usually used for fishing

lock mandrel, packers ,and bridge plugs with internal fish necks.

GR Pulling tool is used to engage and pull sub surface flow control devices that are fitted with an Internal Fishing Neck

Designed to be used when downward jarring is required on the sub surface device prior to pulling

 

Ⅱ. Technical parameters of common specifications

Szie

Actual OD

FN

Fishing OD

Connection

Lower connection thread

2″

1.81″

1.375″

1.38″

15/16″-10UN

1/2-13UN″

2.5″

2.25″

1.375″

1.81″

15/16″-10UN

5/8-11UN″

3″

2.72″

1.75″

2.31″

1-1/16″-10UN

5/8-11UN″

3.5″

3.11″

2.313″

2.62″

1-1/16″-10UN

5/8-11UN″

Technical parameters can also be according to user requirements

 

III. Structural characteristics:

1. GR pulling tool is mainly composed of GS pulling tool (1) and GU Shear Up Adaptor (2), as

shown in the attached assembly drawing.

2. During fishing operation (refer to GS assembly drawing), when the fishing claw (8) touches the

mouth end of the inner fishing neck, it will retreat and fall into the slightly smaller diameter of

the core (9) and be retracted; When the fishing claw (8) completely enters the inner fish neck,

the fishing claw (8) is immediately opened to catch it under the thrust of the compression

auxiliary spring (5). If the tool is blocked upwards, it can be shaken off.

3. Fitted with Industry standard connections and fishing necks
4. Jar up to release functionality

5. Effective jar up release functionality

 

IV. Assembly:

1. Install shear pin:

1.1 first install the shear pin of GS pulling tool (see the specification of GS pulling tool for specific

operation);

1.2 then tighten the coupling nut (4) on GU Shear Up Adaptor on the fish neck of GS pulling tool (5);

1.3 install the fishing neck (1) of GS pulling tool on the coupling nut (2) of GU Shear Up Adaptor

and align it with the pin hole;

1.4 refer to the assembly drawing of GU Shear Up Adaptor, install the cylindrical pin (3) and shear

pin (6), screw the hexagon socket set screws with flat point (5), and rotate the sheath (2) to protect

the shear pin (6);

1.5 refer to the assembly drawing of GS pulling tool, and screw off the outer cylinder (7) of GS pulling

tool to expose the shear pin;

1.6 punch out the shear pin with a punch;

1.7 retighten the outer cylinder (7).

2. Fishing operation:

2.1 connect GR pulling tool under the basic tool string;

2.2 Run the tool string, and determine whether it reaches the salvaged tool through the weight indicator

of the ground winch;

2.3 If the fishing tool is buried by sand, it can be shaken down;

2.4 After slight upward shock, lift the tool string;

2.5 If the lifting is blocked as above, the shear pin can be shaken up and cut off.

3. Unblocking on the ground (refer to the assembly drawing of GS pulling tool):

3.1 Push down the tool and stand against the end of the inner fish neck;

3.2 Squeeze the claw fixing seat (6) from the outer cylinder (7) of the GS pulling tool and pull it up to

release it

Attention:

1. When running the GR pulling tool, check whether the fishing claw is open and retracted normally;

2. Check whether the threaded connection of GR pulling tool is loose;

3. When using GR pulling tool, it is not allowed to install shear pins on GR pulling tool, so as to avoid

being unable to get rid of it.

V. Disassembly and assembly:

1. disassembly:

1.1 install shear pin on GS pulling tool first;

1.2 punch out the shear pin (6) on GU Shear Up Adaptor with a punch;

1.3 Screw off the hexagon socket set screws with flat point (5) on the coupling nut (4) with an Allen wrench;

1.4 flush the cylindrical pin (3) and remove the upper joint (1);

1.5 the vice clamps the coupling nut (4), the pipe wrench clamps the fish neck of the GS pulling tool (5), and

the coupling nut (4) is removed;

1.6 remove the GS fishing device GS pulling tool (see the operating instructions of GS pulling tool for steps).

Note:

1. It is strictly forbidden to use pipe tongs to clamp on the diameter of the fish neck for disassembly, so as not

to damage this surface and affect fishing;

2. It is forbidden to use pipe tongs to clamp on the upper thread of skirt sleeve to avoid deformation.

2. Assembly:

2.1 firstly, install the GS pulling tool (see the operating instructions of GS pulling tool for specific steps);

2.2 complete the assembly of GR pulling tool according to the steps of installing shear pin.

Note:

1. When assembling, the threads must be coated with grease;

2. External burrs or scratches of all parts shall be leveled with a file.

VI.Maintenance 1. After the tool is disassembled, check the damage of each component and replace the

damaged parts.

2. When assembling, apply a thin layer of grease on the thread surface.

3. After assembly, the fishing neck is attached with thread protector and marked for later use.

Contact Details
Baoji Ruixin Energy Equipment Co.,Ltd

Contact Person: Selina Qiang

Tel: 86 13571793445

Send your inquiry directly to us
Baoji Ruixin Energy Equipment Co.,Ltd
401B, High-end Equipment Industrial Park, Baoji High-tech Development Zone, Shaanxi Province
Tel:86-29-89299016
Mobile Site Privacy Policy China Good Quality Wireline Tool String Supplier. © 2021 rxwirelinetools.com. All Rights Reserved.