|Place of Origin:||China Baoji|
|Model Number:||1.5inch - 3inch|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Box|
|Delivery Time:||3-4 weeks|
|Supply Ability:||1 set 3 weeks|
|Name:||2 Inch The Special Fishing Tool Wireline Pulling Tool||Size:||1.5inch - 3inch|
|Material:||Alloy Steel&Nickel Alloy||Fish Neck:||1.187inch 1.375inch 1.75inch 2.313inch|
|Type:||SB SM SS||Connection:||SR,QLS,BLQJ,HDQRJ|
|Grasping Diameter:||0.875inch 1inch 1.187inch 1.375inch 1.75inch 2.313inch 3.125inch|
2 Inch Wireline Pulling Tool,
Steel Fishing Wireline Pulling Tool,
API Q1 Wireline Pulling Tool
2 Inch The special fishing tool Wireline Pulling Tool
This special fishing tool is a special tool for fishing the plunger.
II. Technical parameters:
Specification: 2 "
Actual outer diameter: 1.86"
Salvage neck: 1.375 "
Connection thread: 15/16-10UN
Salvage diameter: 1.375 "
III. Structural features:
Special fishing tools are mainly composed of upper joint, cylinder, guide joint, auxiliary spring and fishing claw. The specific structure is shown in the attached drawings.
IV. Working principle:
This tool is mainly used to salvage the plunger that rises to the wellhead. When the plunger rises to the well head, I want to take out the plunger and stop the plunger from working. Get off the fishing tool, hit downwards, open the fishing claw, grab the head of the plunger and fishing the neck, then you can take out the plunger. Stuffed. Since there is no mandrel in the center of the fishing tool, there is no need to worry about opening the plunger one-way valve during fishing, which ensures the successful fishing of the plunger. At the same time, the front section is equipped with a fishing guide joint, which can make the fishing tool successfully complete the fishing in the φ65 hole. The situation where the plunger salvage neck cannot be found is avoided.
When not in use, apply grease to the thread and place it with a protective wire.
Welcome to contact us at any time.
Contact Person: Selina Qiang
Tel: 86 13571793445