Tel:
Baoji Ruixin Energy Equipment Co.,Ltd
Baoji Ruixin Energy Equipment Co.,Ltd

Innovation Excellence

Home ProductsWireline Pressure Control Equipment

Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel

Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel

  • Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel
Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel
Product Details:
Place of Origin: China Baoji
Brand Name: Ruixin
Certification: API
Model Number: 2inch ID 2.5inch ID 3inch ID 4inch ID
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Wooden Box
Delivery Time: 3-4 weeks
Payment Terms: T/T
Supply Ability: 1 set 3 weeks
Contact Now
Detailed Product Description
Name: Wireline Tool Trap Manual Wireline Pressure Control Size: 2inch 2.5inch 3inch 4inch
Material: Alloy Steel I.D.: 2.5 Inch~6.38 Inch
Use: Wireline &Slickline Control Tyoe: Manual
Work Pressure: 3k 5k 10k 15k Service: Standard&H2S
High Light:

Trap Wireline Pressure Control Equipment

,

Manual Wireline Pressure Control Equipment

,

3 Inch Wireline Pressure Control Equipment

 Wireline Tool Trap Manual Wireline Pressure Control

 

I. Product brief description:
Anti-drop device, also known as the next catcher. It is a safety device to prevent the tool string from accidentally falling into the well when the tool string is lifted out. It is installed below the blowout prevention pipe and above the blowout prevention valve.
II. Main technical parameters:

 Number Specification   Pressure rating
1  2inch  35MPa, 70 MPa
2 2.5inch   35MPa, 70 MPa
3 3inch  35MPa, 70 MPa
4 4inch  35MPa, 70 MPa

Note: The specifications not listed in the above table can be provided according to customer needs
III. Working principle:
When working, the steel wire or cable passes through the slot in the middle of the fork of the anti-dropping device. When the tool string is lifted into the anti-dropping device, the shift fork is lifted into an upright position. After the tool string passes, the shift fork falls back to the horizontal position under the action of the torsion spring, and the tool string is blocked in the blowout prevention pipe. When the tool string goes down the well, the hand pump presses the hydraulic cylinder to make the handle rotate 90°; after the tool string passes, the hand pump releases the pressure, the piston rod returns to the hydraulic cylinder under the action of the spring, and the shift fork is under the action of the torsion spring Return to the horizontal position. You can also manually rotate the handle. After the tool string passes, put down the handle and the fork will automatically fall back to its original position.
IV, matters needing attention:
1. When the tool string goes down the well, observe that the external handle is up to 90°, and the fork is fully opened at this time, otherwise the tool will be obstructed when going down the well;
2. After the tool string enters the wellhead and completely passes through the fall arrester, the hand pump is used to relieve the pressure.
V, product test:
1. Sealing test:
(1). Install the pressure test connector and connect the pressure test pipeline;
(2). Start the pressure test pump for pressure test, hit the required test pressure, keep the pressure for 15 minutes, and fill in the test record card;
(3). Pay attention to check whether there is leakage outside the fork shaft.
2. Performance test:
(1). Connect the hand pump and pipeline to the quick connector;
(2). Squeeze the pump by hand, observe the handle and fork, the fork should be able to open completely;
(3). Relieve the pressure of the hand pump and observe whether the shift fork returns to the original position.
VI, daily maintenance:
1. Do product test every time before going to the well;
2. After each use,
(1). Check whether the o-ring is damaged and replace it in time;
(2). Check whether the manual fork is flexible;
3. When not in use temporarily, you should bring the protective wire for storage.

Welcome to contact us at any time.

Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel 0

Contact Details
Baoji Ruixin Energy Equipment Co.,Ltd

Contact Person: Selina Qiang

Tel: 86 13571793445

Send your inquiry directly to us
Baoji Ruixin Energy Equipment Co.,Ltd
401B, High-end Equipment Industrial Park, Baoji High-tech Development Zone, Shaanxi Province
Tel:86-29-89299016
Mobile Site Privacy Policy China Good Quality Wireline Tool String Supplier. © 2021 - 2022 rxwirelinetools.com. All Rights Reserved.