|Place of Origin:||China Baoji|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Box|
|Delivery Time:||3-4 weeks|
|Supply Ability:||1 set 3 weeks|
|Name:||3.5 Inch Wax Removal Drill Gauge Cutter Wireline||Szie:||2.875inch~3.5inch|
|Material:||Alloy Steel&Nickel Alloy||FN:||1.375inch|
|Advantage:||Broaches Can Be Manufactured In Many Sizes|
3.5 Inch Gauge Cutter Wireline,
Nickel Alloy Gauge Cutter Wireline,
HDQRJ Connection Gauge Cutter Wireline
3.5 Inch Wax Removal Drill Gauge Cutter Wireline
The dewaxing drill is a common tool for dewaxing using wire work tools.
II. Technical parameters of common specifications:
|Tubing specification||Actual outer diameter||Fishing neck||Connection|
III. Structural features and use:
The wax removal drill is an integrated structure, the upper end is the connecting thread and the fishing neck, and the lower end is the part used for wax scraping, rust removal and stone chips. Using a structural principle similar to a twist drill, it can be directly connected to the lower part of the weighting rod downhole. The surface hardness of the lower end is high after quenching, which can smoothly remove wax, rust and stone chips. There is a large chip hole in the middle of the wax removal drill bit, which can smoothly discharge wax and drill cuttings, avoiding accumulation of drill cuttings, and making the tool unable to work normally. When using, the wax needs to be removed step by step. Use a small dewaxing drill to clean it first, and then use a large dewaxing drill.
IV, matters needing attention:
1, in order to ensure free rotation of the tool, it must be connected to a rotary joint in the tool string below the basic cord cap to prevent distortion of the wire.
2, in addition to high wax wax portion of the drill bit the hardness, safekeeping after use, to avoid collision with a hard object, the use of impact.
3. After using the connecting thread, apply grease and place it with a protective wire.
Welcome to contact us at any time.
Contact Person: Selina Qiang
Tel: 86 13571793445