|Place of Origin:||China Baoji|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Box|
|Delivery Time:||2-3 weeks|
|Supply Ability:||1 set 2 weeks|
|Name:||3.5 Inch The Wax Scraper Gauge Cutter Wireline||Szie:||2.875inch~3.5inch|
|Material:||Alloy Steel&Nickel Alloy||FN:||1.375inch|
|Advantage:||Broaches Can Be Manufactured In Many Sizes|
OD 52mm Gauge Cutter Wireline,
Thin Walled Gauge Cutter Wireline,
Rotary Joint Gauge Cutter Wireline
3.5 Inch The Wax Scraper Gauge Cutter Wireline
The Wax scraper is a common tool for wax removal with steel wire tools.
II. Technical parameters of common specifications:
|Tubing specification||Actual outer diameter||Fishing neck||Connection|
III. Structural features and use:
The wax scraper is mainly composed of an upper joint, a connecting rod, a scraper, a lower joint and a fixing frame. Scraper is a thin-walled annular blade with cutting edges at both ends. The upper joint is connected to the lower part of the rotary joint, and the lower joint is connected to the weighting rod. In order to ensure the free rotation of the tool, a rotary joint must be connected under the rope cap of the basic tool string, and the scraper can also rotate freely to prevent the wire from being twisted off.
IV, matters needing attention:
1. In order to ensure the free rotation of the tool, a rotary joint must be connected under the rope cap of the basic tool string to prevent the wire from being twisted off.
2. As the scraper part of the wax scraper is sharp, it should be properly kept after use to avoid bumping against hard objects and cutting, which will affect the use.
3. After using the connecting thread, apply grease, and put away the thread protector.
Tools can be manufactured to any size required. Welcome to contact us at any time.
Contact Person: Selina Qiang
Tel: 86 13571793445