Tel:
Baoji Ruixin Energy Equipment Co.,Ltd
Baoji Ruixin Energy Equipment Co.,Ltd

Innovation Excellence

Home ProductsWireline Pressure Control Equipment

Wireline Hay Pulley Slickline Pressure Control Equipment 20KN Load

Wireline Hay Pulley Slickline Pressure Control Equipment 20KN Load

  • Wireline Hay Pulley Slickline Pressure Control Equipment 20KN Load
Wireline Hay Pulley Slickline Pressure Control Equipment 20KN Load
Product Details:
Place of Origin: China Baoji
Brand Name: Ruixin
Certification: API
Model Number: 12 inch 14inch 16inch
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Wooden Box
Delivery Time: 3-4 weeks
Payment Terms: T/T
Supply Ability: 1 set 3 weels
Contact Now
Detailed Product Description
Name: Wireline Hay Pulley Wellhead Wireline Pressure Control Use: Well Intervention
Sheave Size: 12inch~16inch Wireline PCE: Wireline Hay Pulley
Material: Cast Aluminum Operation: Wireline Operation And Slickline Operation
High Light:

Hay Pulley Slickline Pressure Control Equipment

,

Wireline Slickline Pressure Control Equipment

,

20KN Slickline Pressure Control Equipment

Wireline Pressure Control Wireline Hay Pulley

I. Introduction:

The ground pulley is used to pull the steel wire or cable (wire rope) from the top of the blowout pipe to the steel wire or cable drum plane, so that the pulling force of the steel wire or cable (wire rope) is moved from the vertex to the Christmas tree, thereby reducing the steel wire or cable (wire rope) The side tension load prevents the blowout pipe from being bent and damaged. You can also lift the ground pulley to change the load direction of the steel wire or cable (wire rope).

II. Technical parameters:

1. Applicable steel wire specification: 0.16";
2. Pulley specification: 16";
3. Safety load: 20KN (2.0 tons).

III. How to use:
1. After connecting the ground pulley to the tension meter (referring to the weight meter), connect it to the well head with a rope. Adjust the rope length according to the position of the winch drum to make the wire as parallel as possible to the drum plane (that is, the angle between the wire coming down from the top of the blowout pipe and the wire going out of the drum is approximately 90 degrees);
If the ground pulley is hoisted to change the load direction of the steel wire or cable (wire rope), directly use the hook to pass through the hoisting ring to hoist the pulley;
2. Unscrew the compression nut on the pulley bracket, and unscrew the lock block counterclockwise to expose the groove on the pulley bracket;
3. The steel wire or cable (wire rope) is inserted into the pulley groove through the pulley bracket groove;
4. Rotate the lock block 90° clockwise, and then tighten the compression nut.
IV. matters needing attention:
1. Before use, check the wear of the anti-hopping block on the carrier to ensure that the steel wire or cable (wire rope) does not jump out of the wheel groove;
2. When storing, it is strictly forbidden to hit the pulley with heavy objects to avoid deformation;
3. The specifications of the ground pulley should be selected according to the diameter of the steel wire or cable (steel rope), so as to avoid excessive bending of the steel wire or cable (steel rope) and fatigue damage;
4. When the ground pulley is used in conjunction with the floor stand, it can prevent the steel wire from instantaneous relaxation and impact on the pulley.
Welcome to comtact us at any time.

Contact Details
Baoji Ruixin Energy Equipment Co.,Ltd

Contact Person: Selina Qiang

Tel: 86 13571793445

Send your inquiry directly to us
Baoji Ruixin Energy Equipment Co.,Ltd
401B, High-end Equipment Industrial Park, Baoji High-tech Development Zone, Shaanxi Province
Tel:86-29-89299016
Mobile Site Privacy Policy China Good Quality Wireline Tool String Supplier. © 2021 rxwirelinetools.com. All Rights Reserved.