|Place of Origin:||China Baoji|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Box|
|Delivery Time:||2-3 weeks|
|Supply Ability:||1 set 2 weeks|
|Name:||Wireline Fishing Tool Sidewall Cutter||Specifications:||2-3/8inch-4-1/2inch|
|OD:||1.78inch-3.43inch||FN.:||1.375inch 1.75inch 2.313inch|
Sidewall Cutter Wireline Fishing Tool,
Wireline Sidewall Cutter,
Sidewall Cutter Wireline Tools
API Q1 Approved Sidewall Cutter Wireline Fishing Tool
Wireline Fishing Tool Wireline Snipper
Wall cutter, also known as the side wall cutter, is used to cut the steel wire on the inner
wall of the tubing. When the wire can not be salvaging, it can be used to cut the wire by
the limitation and support of the inner wall of the tubing, to reduce the difficulty of
subsequent wire salvage.
Common specifications and technical parameters:
|OD. of blade after opening|
The wall cutter is mainly composed of slip mandrel, upper cutter, Lower cutter , Band
Welded, slip Carrier, Guide, Split Ring ,Hole Retaining Ring. Its structure is simple and
maintenance is convenient.
The slip mandrel is equipped with a taper, which can expand the cutter to the tubing
wall to cut the wire; The through-hole in the slip mandrel is used for overflow to balance
up and down pressure. The upper end of the slip mandrel is provided with a cutting pin
hole for connecting the running tool; The cutter is composed of a group (usually four)
of cutters, which stagger each other, but can form a complete circle of cutting edges.
Each cutter is evenly distributed in the guide groove on the slip mandrel, and is connected
together with slip carrier to make its actions synchronous. The Guide is connected with
the slip carrier, which runs down to the end of the rope socket and down to the top of the
rope socket . The slip mandrel continues to move down to make the cutters expand and
squeeze on the inner wall of the tubing, cutting the wire.
1. Connect the wall cutter under the SB or F-type running tool to run the well; (tubular
jar is required in the tool string)
2. When down to the depth of the rope socket, use the jar to shake down;
3. After the shock is completed, the tool can be lifted up;
4. If you encounter obstacles while lifting the tool up, it can be shaken out of hand down
(when connected to the lower part of the SB tool) or up (when connected to the F-type
running tool) Shock release
Matters needing attention:
1. The edge of the cutter is sharp, so please So pay attention to the operation.
2. Before operation, check whether the cutter can be opened freely without obstruction.
Welcome to contact us at any time.
Contact Person: Selina Qiang
Tel: 86 13571793445