Tel:
China Wireline Tool String manufacturer
Baoji Ruixin Energy Equipment Co.,Ltd

Innovation Excellence

Home ProductsWireline Pulling Tool

Nickel Alloy Wireline Pulling Tool Fishing OD 1.375 Inch

Nickel Alloy Wireline Pulling Tool Fishing OD 1.375 Inch

    • Nickel Alloy Wireline Pulling Tool Fishing OD 1.375 Inch
  • Nickel Alloy Wireline Pulling Tool Fishing OD 1.375 Inch

    Product Details:

    Place of Origin: China Baoji
    Brand Name: Ruixin
    Certification: API Q1
    Model Number: 2inch 2.5inch 3inch 3.5inch

    Payment & Shipping Terms:

    Minimum Order Quantity: 1
    Packaging Details: Wooden Box
    Delivery Time: 2-4weeks
    Payment Terms: T/T, Western Union
    Contact Now
    Detailed Product Description
    Material: Alloy Steel&Nickel Alloy Size: 2inch 2.5inch 3inch 3.5inch 4inch 5inch
    Fish Neck: 1.375inch 1.75inch 2.313inch 3.125inch Actual OD: 1.81inch~
    Fishing OD: 1.375inch~2.61inch Connection: SR,QLS,BLQJ,HDQRJ
    High Light:

    GR Wireline Pulling Tool

    ,

    1.375 Inch GR Pulling Tool

    ,

    Wireline GR Pulling Tool

    Nickel Alloy Wireline Pulling Tool Fishing OD 1.375 Inch

     

    GR Pulling Tool Wireline Pulling Tool

    Ⅰ. Introduction

    GR pulling tool is composed of GU shear up adaptor (upward shear adaptor) and GS pulling

    tool (without shear pin), which can be released by upward shear. It is usually used for fishing

    lock mandrel, packers ,and bridge plugs with internal fish necks.

    Ⅱ. Technical parameters of common specifications

    Szie

    Actual OD

    FN

    Fishing OD

    Connection

    Lower connection thread

    2″

    1.81″

    1.375″

    1.38″

    15/16″-10UN

    1/2-13UN″

    2.5″

    2.25″

    1.375″

    1.81″

    15/16″-10UN

    5/8-11UN″

    3″

    2.72″

    1.75″

    2.31″

    1-1/16″-10UN

    5/8-11UN″

    3.5″

    3.11″

    2.313″

    2.62″

    1-1/16″-10UN

    5/8-11UN″

    Technical parameters can also be according to user requirements

     

    III. Structural characteristics:

    GR pulling tool is mainly composed of GS pulling tool (1) and GU Shear Up Adaptor (2), as

    shown in the attached assembly drawing.

    During fishing operation (refer to GS assembly drawing), when the fishing claw (8) touches the

    mouth end of the inner fishing neck, it will retreat and fall into the slightly smaller diameter of

    the core (9) and be retracted; When the fishing claw (8) completely enters the inner fish neck,

    the fishing claw (8) is immediately opened to catch it under the thrust of the compression

    auxiliary spring (5). If the tool is blocked upwards, it can be shaken off.

     

    IV. Usage:

    1. Install shear pin:

    1.1 first install the shear pin of GS pulling tool (see the specification of GS pulling tool for specific

    operation);

    1.2 then tighten the coupling nut (4) on GU Shear Up Adaptor on the fish neck of GS pulling tool (5);

    1.3 install the fishing neck (1) of GS pulling tool on the coupling nut (2) of GU Shear Up Adaptor

    and align it with the pin hole;

    1.4 refer to the assembly drawing of GU Shear Up Adaptor, install the cylindrical pin (3) and shear

    pin (6), screw the hexagon socket set screws with flat point (5), and rotate the sheath (2) to protect

    the shear pin (6);

    1.5 refer to the assembly drawing of GS pulling tool, and screw off the outer cylinder (7) of GS pulling

    tool to expose the shear pin;

    1.6 punch out the shear pin with a punch;

    1.7 retighten the outer cylinder (7).

    2. Fishing operation:

    2.1 connect GR pulling tool under the basic tool string;

    2.2 Run the tool string, and determine whether it reaches the salvaged tool through the weight indicator

    of the ground winch;

    2.3 If the fishing tool is buried by sand, it can be shaken down;

    2.4 After slight upward shock, lift the tool string;

    2.5 If the lifting is blocked as above, the shear pin can be shaken up and cut off.

    3. Unblocking on the ground (refer to the assembly drawing of GS pulling tool):

    3.1 Push down the tool and stand against the end of the inner fish neck;

    3.2 Squeeze the claw fixing seat (6) from the outer cylinder (7) of the GS pulling tool and pull it up to

    release it

     

    Attention:

    1. When running the GR pulling tool, check whether the fishing claw is open and retracted normally;

    2. Check whether the threaded connection of GR pulling tool is loose;

    3. When using GR pulling tool, it is not allowed to install shear pins on GR pulling tool, so as to avoid

    being unable to get rid of it.

    V. Disassembly and assembly:

    1. disassembly:

    1.1 install shear pin on GS pulling tool first;

    1.2 punch out the shear pin (6) on GU Shear Up Adaptor with a punch;

    1.3 Screw off the hexagon socket set screws with flat point (5) on the coupling nut (4) with an Allen wrench;

    1.4 flush the cylindrical pin (3) and remove the upper joint (1);

    1.5 the vice clamps the coupling nut (4), the pipe wrench clamps the fish neck of the GS pulling tool (5), and

    the coupling nut (4) is removed;

    1.6 remove the GS fishing device GS pulling tool (see the operating instructions of GS pulling tool for steps).

    Note:

    1. It is strictly forbidden to use pipe tongs to clamp on the diameter of the fish neck for disassembly, so as not

    to damage this surface and affect fishing;

    2. It is forbidden to use pipe tongs to clamp on the upper thread of skirt sleeve to avoid deformation.

    2. Assembly:

    2.1 firstly, install the GS pulling tool (see the operating instructions of GS pulling tool for specific steps);

    2.2 complete the assembly of GR pulling tool according to the steps of installing shear pin.

    Note:

    1. When assembling, the threads must be coated with grease;

    2. External burrs or scratches of all parts shall be leveled with a file.

    VI.Maintenance 1. After the tool is disassembled, check the damage of each component and replace the

    damaged parts.

    2. When assembling, apply a thin layer of grease on the thread surface.

    3. After assembly, the fishing neck is attached with thread protector and marked for later use.

    Contact Details
    Baoji Ruixin Energy Equipment Co.,Ltd

    Contact Person: Selina Qiang

    Tel: 86 13571793445

    Send your inquiry directly to us
    Baoji Ruixin Energy Equipment Co.,Ltd
    401B, High-end Equipment Industrial Park, Baoji High-tech Development Zone, Shaanxi Province
    Tel:86-29-89299016
    Mobile Site Privacy Policy China Good Quality Wireline Tool String Supplier. © 2021 rxwirelinetools.com. All Rights Reserved.