Innovation Excellence
 |
| Place of Origin: | China Baoji |
| Brand Name: | Ruixin |
| Certification: | API |
| Model Number: | 2.813inch 3.813inch |
| Minimum Order Quantity: | 1 |
|---|---|
| Packaging Details: | Wooden Box |
| Delivery Time: | 2-3 weeks |
| Payment Terms: | T/T |
| Supply Ability: | 1 set 2 weeks |
| Name: | Wireline Lock Mandrel FWG Plugs | Size: | 2.813inch 3.813inch |
|---|---|---|---|
| Lock Cylinder Salvage Diameter: | 2inch-4inch | Balance Bar Fishing Neck: | 1.375inch-3.125inch |
| Balance Bar Fishing Tool: | 2inchSB-4inchSB | ||
| High Light: | FWG Plugs Wireline Lock Mandrel,Anti Rust FWG Plugs,Wireline FWG Plugs |
||
Anti Rust FWG Plugs Wireline Lock Mandrel Wear Resistant
Wireline Lock Mandrel FWG plugs
Wireline Lock Mandrel FWG plugs Bypass Blanking Plugs with Removable Mandrels are positive blank-off services designed
to seal off pressure from above and below. Wireline Lock Mandrel FWG plugs Blanking Plugs are equipped for Bottom No-Go
landing in Model “R” NonPorting Seating Nipples. The plugs are compatible with normal wireline equipment and procedures
Product description:
| Size | Lock cylinder salvage diameter | Balance bar fishing neck | Balance bar fishing tool |
| 1.875＂ | 2＂ | 1.375＂ | 2＂SB |
| 2.313＂ | 2.5＂ | 1.375＂ | 2＂SB |
| 2.813＂ | 3＂ | 1.375＂ | 2＂SB |
| 3.813＂ | 4＂ | 3.125＂ | 4＂SB |
Running of the plug:
1. firstly, connect the valve cap to the X/XN lock cylinder up and down to the preset working cylinder;
2. Connect the balance bar to the SB fishing tool and run down the well;
3. Lower it slowly after reaching the depth to be dropped, so that the P-type balance bar can enter the sealing hole of the bonnet;
4. Shook down slightly to make the P-type balance bar reach its position;
5. Shook down to cut off the shear pin of the running SB fishing tool;
6. Trip out and run the tool. At this time, the P-type balance bar remains in the well to complete the plugging. Note: Before running in the well, check whether the seal is intact.
Salvage of plugs:
1. run SB-type fishing tool to fish out p-type balance bar first;
2. Run GR fishing tool to fish X/XN lock cylinder.
matters needing attention:
1. Replace the seal before running in the well;
2. If there are burrs or bites on the outside, it should be repaired with a file in time.
Welcome to contact us at any time
Contact Person: Selina Qiang
Tel: 86 13571793445
