Send Message
Tel:
Ruixin Energy Equipmnet
Ruixin Energy Equipmnet

Innovation Excellence

Home ProductsCoiled Tubing Tools

1.5" CT Straight Joint Coiled Tubing Tools 200KN 35Mpa

1.5" CT Straight Joint Coiled Tubing Tools 200KN 35Mpa

  • 1.5" CT Straight Joint Coiled Tubing Tools 200KN 35Mpa
1.5" CT Straight Joint Coiled Tubing Tools 200KN 35Mpa
Product Details:
Place of Origin: China Baoji
Brand Name: Ruixin
Certification: API
Model Number: 1.5inch-3.125inch
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Wooden Box
Delivery Time: 3-4 weeks
Payment Terms: T/T
Supply Ability: 1 set 3 weeks
Contact Now
Detailed Product Description
Name: 1.5"CT Straight Joint Coiled Tubing Tools Size: 1.5inch-3.125inch
Fishing Neck:: 2.313inch Breakthrough Pressure:: 35Mpa
Coiled Tubing Specification: 1-1/2 Inch
High Light:

CT Straight Joint Coiled Tubing Tools

,

1.5" CT Coiled Tubing Tools

,

Coiled Tubing Tools 200KN

 

1.5"CT Straight Joint Coiled Tubing Tools

 

I. Overview:

Coiled tubing connector is used to connect coiled tubing with coiled tubing operation tools. It is the uppermost tool in coiled tubing operation.

II. Technical parameters:

1. coiled tubing specification: 1-1/2 ";

2. Breakthrough pressure: 35Mpa;;

3. Fishing neck: 2.313 ";

4. Size: 1-5/32 "; Safety load: 200KN.

III. Structural characteristics:

Coiled tubing connector is composed of coiled tubing connector, coiled tubing connector slip, backing ring, sealing ring top thread, etc. See the explanatory diagram for the specific structure.

IV.  Precautions:

1. Before use, measure the outer diameter of coiled tubing. The tool is applicable to coiled tubing with a specification of 1.5 ",so the outer diameter of coiled tubing must be within the range of φ Φ38.1±0.25mm If it is out of tolerance, the outer diameter of coiled tubing must be ground within the above standard size;

2. Check the straightness of coiled tubing at the same time. The straightness of coiled tubing is ≤1mm/1m. If it is bent, it cannot be used, and the straight end must be re-cut for use;

3. After cutting the coiled tubing, it is necessary to ensure that the cutting end is flush, and the chamfer can be used only after grinding with a file to prevent the coiled tubing from cutting the sealing ring;

4. Make sure there is no leakage in the pressure seal test before use;

5. When temporarily not in use, apply lubricating oil to the seal, and put the thread belt thread protector away.

Welcome to contact us at any time.

1.5" CT Straight Joint Coiled Tubing Tools 200KN 35Mpa 0

Contact Details
Ruixin Energy Equipmnet

Contact Person: Selina Qiang

Tel: 86 13571793445

Send your inquiry directly to us
Ruixin Energy Equipmnet
Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Tel:00-86-13571793445
Mobile Site Privacy Policy | China Good Quality Wireline Tool String Supplier. © 2021 - 2024 rxwirelinetools.com. All Rights Reserved.