Send Message
Tel:
Ruixin Energy Equipmnet
Ruixin Energy Equipmnet

Innovation Excellence

Home ProductsWireline Pressure Control Equipment

Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel

Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel

  • Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel
Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel
Product Details:
Place of Origin: China Baoji
Brand Name: Ruixin
Certification: API
Model Number: 2inch ID 2.5inch ID 3inch ID 4inch ID
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Wooden Box
Delivery Time: 3-4 weeks
Payment Terms: T/T
Supply Ability: 1 set 3 weeks
Contact Now
Detailed Product Description
Name: Wireline Tool Trap Manual Wireline Pressure Control Size: 2inch 2.5inch 3inch 4inch
I.D.: 2.5 Inch~6.38 Inch Material: Alloy Steel
Work Pressure: 3k 5k 10k 15k Use: Wireline &Slickline
Service: Standard&H2S Control Tyoe: Manual
High Light:

Trap Wireline Pressure Control Equipment

,

Manual Wireline Pressure Control Equipment

,

3 Inch Wireline Pressure Control Equipment

 Wireline Tool Trap Manual Wireline Pressure Control

 

I. Product brief description:
Anti-drop device, also known as the next catcher. It is a safety device to prevent the tool string from accidentally falling into the well when the tool string is lifted out. It is installed below the blowout prevention pipe and above the blowout prevention valve.
Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel 0

II. Main technical parameters:

 Number Specification   Pressure rating
1  2inch  35MPa, 70 MPa
2 2.5inch   35MPa, 70 MPa
3 3inch  35MPa, 70 MPa
4 4inch  35MPa, 70 MPa

Note: The specifications not listed in the above table can be provided according to customer needs
III. Working principle:
When working, the steel wire or cable passes through the slot in the middle of the fork of the anti-dropping device. When the tool string is lifted into the anti-dropping device, the shift fork is lifted into an upright position. 
IV, daily maintenance:
1. Do product test every time before going to the well;
2. After each use,
(1). Check whether the o-ring is damaged and replace it in time;
(2). Check whether the manual fork is flexible;
3. When not in use temporarily, you should bring the protective wire for storage.

Welcome to contact us at any time.

Manual 3 Inch Tool Trap Wireline Pressure Control Equipment Alloy Steel 1

Contact Details
Ruixin Energy Equipmnet

Contact Person: Selina Qiang

Tel: 86 13571793445

Send your inquiry directly to us
Ruixin Energy Equipmnet
Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Tel:00-86-13571793445
Mobile Site Privacy Policy | China Good Quality Wireline Tool String Supplier. © 2021 - 2024 rxwirelinetools.com. All Rights Reserved.