Send Message
Tel:
Ruixin Energy Equipmnet
Ruixin Energy Equipmnet

Innovation Excellence

Home ProductsWireline Pressure Control Equipment

Wireline Pressure Control Alloy Steel Wellhead Flange ID 2.5 Inch

Wireline Pressure Control Alloy Steel Wellhead Flange ID 2.5 Inch

  • Wireline Pressure Control Alloy Steel Wellhead Flange ID 2.5 Inch
Wireline Pressure Control Alloy Steel Wellhead Flange ID 2.5 Inch
Product Details:
Place of Origin: China Baoji
Brand Name: Ruixin
Certification: API
Model Number: 6B×(2-9/16) 6B×(3-1/16) 6B×(5-1/8)
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Wooden Box
Delivery Time: 2-3 weeks
Payment Terms: T/T
Supply Ability: 1 set 2 weeks
Contact Now
Detailed Product Description
Name: Wireline Pressure Control Equipment Alloy Steel Wellhead Flange 2 Inch Size: 2inch ID 2.5inch ID 3inch ID 4inch ID 5inch ID
Material: Alloy Steel&Nickel Alloy Connection Type: O&B
Function: Allows For Only The Joint That Was Broken To Be Tested, Without Filling The Whole Lubricator System Work Pressure: 3k 5k 10k 15k
Service: Standard&H2S
High Light:

Wireline Pressure Control Wellhead Flange

,

Wireline Alloy Steel Wellhead Flange

,

ID 2.5Inch Steel Wellhead Flange

 Wireline Pressure Control Equipment Alloy Steel Wellhead Flange 

I. Overview
The wellhead flange is used to connect the tubing male buckle and the wellhead, the upper part is connected to the tubing male buckle, and the lower part is connected to the wellhead.
The wellhead flange is connected by bolts and nuts. When in use, the gasket is placed between the sealing surfaces. After tightening the nut, the specific pressure on the gasket surface reaches a certain value and deforms and fills up the unevenness of the sealing surface to make the connection tight and leak-proof.
II, pressure test:
Wellhead flanges should be subjected to regular pressure strength tests, and the test pressure is 1.5 times the working pressure.
1. Install the pressure test connector and connect the pressure test pipeline;
2. Start the pressure test pump for pressure test: press to the test pressure, keep the pressure for 15 minutes without leakage, and fill in the test record card.
III, daily maintenance:
1. The withstand voltage test should be carried out regularly;
2. When not in use temporarily, you should bring the protective wire for storage.

Welcome to contact us at any time.

Wireline Pressure Control Alloy Steel Wellhead Flange ID 2.5 Inch 0

Contact Details
Ruixin Energy Equipmnet

Contact Person: Selina Qiang

Tel: 86 13571793445

Send your inquiry directly to us
Ruixin Energy Equipmnet
Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Tel:00-86-13571793445
Mobile Site Privacy Policy | China Good Quality Wireline Tool String Supplier. © 2021 - 2024 rxwirelinetools.com. All Rights Reserved.