|Place of Origin:||China Baoji|
|Model Number:||3.5 inch seal 3.75 inch seal 4 inch seal 4.75 inch seal|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Box|
|Delivery Time:||5-6 weeks|
|Supply Ability:||1 set 5 weeks|
|Name:||Grease Injection System Wireline Pressure Control||Specification And Model:||ZB1-70|
|Rated Output Pressure:||70MPa||Driving Air Pressure:||0.7～1 MPa|
|Oil Tank Volume:||202 L|
70MPa Grease Injection System,
70MPa Wireline Pressure Control Equipment,
Wireline Simple grease injection pump
70MPa Wireline Pressure Control Equipment Grease Injection System
Grease Injection System Wireline Pressure Control
Simple grease injection pump is used to supply high-pressure sealing grease to grease injection pipe and grease injection sealing head. When the steel wire or cable works, the high-pressure sealing grease output from the grease injection pump enters the lower part of the choke pipe, flows upwards, and is finally discharged from the outlet of the upper part of the choke pipe, which produces a great pressure drop in the choke pipe, thus achieving the purpose of lubricating the cable (or steel wire) and sealing the wellhead pressure.
II. Main technical parameters:
1. specification and model: ZB1-70；
2. rated output pressure: 70MPa；
3. Driving air pressure: 0.7～1 MPa；;
4. Oil tank volume: 202 L;
5. Overall dimensions (length × width × height /m): 1300*1000*1953.
III. Structural characteristics: Simple grease injection pump mainly consists of driving pump body, pump frame, hose line and pipeline. The equipment is equipped with a single-drive pump body, which is installed on the pump frame and driven by compressed air for liposuction. The pump frame is equipped with an oil tank and a lifting hole. The pipeline system includes air inlet pipeline, grease outlet pipeline and pressure relief pipeline.
IV. Usage (with operation schematic diagram):
1. Connect the gas pipeline;
2. Connect the grease injection pipeline and the grease return pipeline;
3. Adjust the air inlet pressure regulating valve so that the pressure displayed by the air pressure gauge is 0.7MPa (adjusted before the product leaves the factory);
4. Open the pressure relief valve and rotate the manual valve to the "open" state to start the trial operation of the pump;
5. Open the grease injection valve, close the pressure relief valve, and the pump enters the normal grease injection operation state.
1. add lubricating oil to the oil atomizer of the air intake system regularly. it is recommended to use N32(20#) engine oil in winter and N46(30#) engine oil in summer.
2. Regularly inspect the pipeline seal.
Contact Person: Selina Qiang
Tel: 86 13571793445