|Place of Origin:||China Baoji|
|Model Number:||1.5inch 2inch 2.5inch 3inch 3.5inch，4inch 5inch 6inch 7inch|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Box|
|Payment Terms:||T/T, Western Union|
|Material:||Alloy Steel&Nickel Alloy||Size:||1.5inch 2inch 2.5inch 3inch 3.5inch，4inch 5inch 6inch 7inch|
|Fish Neck:||1.187inch 1.375inch 1.75inch 2.313inch 3.125inch||Actual OD:||1.47inch~5.83inch|
A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear joint), it can be converted to be an upward shear and releasing tool.
|Size||Actual OD||Fishing neck||Fishing diameter||Connection||PN.|
Note: More customized parts are available upon request.
III. Structural features
The GS type pulling tool is mainly composed of fishing neck, shear pin seat, main spring, spring seat, secondary spring, fixed seat of claw, skirt, fishing claw, mandrel, etc..
While the tool is fishing and when the fishing claw just touches the mouth end of the inner fishing neck, it will retreat and fall in the position where the mandrel diameter is a little small and then is taken back; after the fishing claw enters into the inner fishing neck completely, the fishing claw will splay immediately with the thrust of compressed secondary spring.
While throwing it and when the skirt withstands the end face of the inner fishing neck, the tool will move downward can cut off the shear pin because of the relative motion of mandrel and shear pin seat; under the function of main spring and spring seat, the fishing claw and mandrel have relative motion and then the fishing claw withdraws.
Contact Person: Selina Qiang
Tel: 86 13571793445