Wear Resistant Nickel Alloy X Wireline Running Tool

Wear Resistant Nickel Alloy X Wireline Running Tool

X Running Tools Wireline Running Tool

• Introduction

An X running tool is a special tool used to run and set X/XN type lock mandrel. It can set the type

X/XN lock mandrel into X/XN landing nipple selectively.

• General Technical Parameters

• Structure Characteristics

The X running tool consists of fishing neck, inner sleeve, stop pin, main spring, spring housing, dog

spring, split ring, locator dog, dog housing, crescent slide, retainer dog and mandrel. Enclosed is the

assembly drawing.

Before operation, the retainer dog catches the inner fishing neck of lock mandrel, and then connect the

lock mandrel to the mandrel by shear pin. Make the crescent slide stuck into the groove of mandrel to

prevent movement.

The locator dog will retreat to the groove of inner sleeve when the X running tool is entering the landing

nipple. After passing through the landing nipple, the locator dog will expand automatically with the action

of the dog spring.

After passing through the desired landing nipple, pull the toolstring upwards. The locator dog makes the

dog housing move down to have the locator dog stuck into the groove of the inner sleeve. At this moment,

the crescent slide will release the mandrel and the lock mandrel key will flick and locate into the keyways

of landing nipple.

Jar downwards to shear off the shear pin of X running tool. Then jar upwards to shear off the shear pin of l

ock mandrel. Remove from wellbore.

    Tools Can Be Manufactured To Any Size Required. Welcome to contact us at any time.