Place of Origin: | China Baoji |
Brand Name: | Ruixin |
Certification: | API |
Model Number: | 2inch ID 3inch ID 4.06inch ID 5-1/8inch ID |
Minimum Order Quantity: | 1 |
---|---|
Packaging Details: | Wooden Box |
Delivery Time: | 4-5 weeks |
Payment Terms: | T/T |
Supply Ability: | 1 set 4 weeks |
Name: | Wireline Lubricator Wireline Pressure Control | Material: | Alloy Steel |
---|---|---|---|
Type: | O&B | ID: | 2"~5" |
Length: | 4ft 6ft 8ft 10ft | Work Pressure: | 3k 5k 10k 15k |
Service: | STD&H2S | ||
Highlight: | Quick Union Wireline Lubricator,Hydraulic Wireline Lubricator,Pressure Control Wireline Lubricator |
Quick Union Wireline Lubricator Hydraulic Pressure Control
I. Introduction
Wireline Lubricator Wireline Pressure Control is a tube which with quick union and can stand high pressure, it’s used to accommodate wireline toolstring. Wireline Lubricator Wireline Pressure Control bottom end is connected with blow our preventor, upper end is connected with hydraulic stuffing box and grease injection system. Usually lubricator length is 8ft, sometimes also available 4ft and 7ft, it’s decided by the downhole tools length when operation. There are two types: Upper and lower lubricator.Upper lubricator is basic toolstring such as rope socket, stem, jar, etc; Lower lubricator is for accommodate downhole devices, it’s with bleed off port. Install the pressure jointon it and then install the pressure release valve to read the well pressure and release it.
II. General Technical Parameters
OTIS Quick Union
Bore |
Work Pressure |
Service |
Connection |
Seal Dia. |
2.5" |
5K 10K |
Std H2S |
5"-4ACME |
3.5" |
3" |
5K |
H2S |
5"-4ACME |
3.5" |
3" |
10K |
Std |
5"-4ACME |
3.5" |
3" |
10K |
Std H2S |
5-3/4"-4ACME |
4" |
2.5" |
15K |
H2S |
5-3/4"-4ACME |
4" |
4" |
5K 10K |
Std |
6-1/2"-4ACME |
4.75" |
3" |
15K |
Std H2S |
7-1/2"-4ACME |
5.5" |
5" |
5K |
Std H2S |
8-1/4"-4ACME |
6.188" |
4" |
10K |
Std H2S |
8-3/8"-4ACME |
5.25" |
5" |
5K 10K |
Std H2S |
9"-4ACME |
6.75" |
4" |
15K |
Std H2S |
9-1/2"-4ACME |
6.25" |
6.38" |
10K |
Std H2S |
11-1/2"-4ACME |
8.25" |
BOWEN Quick Union
Bore |
Work Pressure |
Service |
Connection |
Seal Dia. |
2.5" |
5K 10K |
Std H2S |
4-3/4"-4ACME |
3.75" |
3" |
5K 10K |
Std |
4-3/4"-4ACME |
3.75" |
3" |
5K |
H2S |
4-3/4"-4ACME |
3.75" |
3" |
5K |
Std H2S |
5-1/2"-4ACME×2 |
4.375" |
3" |
10K |
Std |
5-1/2"-4ACME×2 |
4.375" |
2.5" |
15K |
Std H2S |
6-5/16"-4ACME |
4.375" |
3" |
10K |
Std H2S |
6-5/16"-4ACME |
4.375" |
3" |
15K |
Std H2S |
7"-5STUB ACME |
4.375" |
4" |
5K |
H2S |
7"-5STUB ACME |
4.375" |
4" |
10K |
H2S |
8-1/4"-4ACME×2 |
6.0" |
III. Structure Features
Lubricator is mainly consist of tube, nut and slips, etc.:Tube is the main pressure-bearing part to accommodates toolstring inside, it’s lubricator body part; Seal ring is installed on the quick union part to ensure thesealing connection of the lubricators.Nut and slips are mainly for connection
function.
IV. Pressure Test
The lubricator should be tested for compressive strength periodically, the test pressure is 1.5 times of the working pressure.
1. Install the test sub and test pipeline.
2. Open the test pump for the pressure test and press the pressure to test, holding 15 minutes and fill the test record card.
V. Maintenance
1. Replace the seals after each time usage.
2. Install with the thread protector when in storage.
Welcome to contact us at any time.
Contact Person: Selina Qiang
Tel: 86 13571793445