|Place of Origin:||China Baoji|
|Model Number:||2.5inch ID 3inch ID 4inch ID 5inch ID|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Box|
|Delivery Time:||2-3 weeks|
|Supply Ability:||1 set 2 weeks|
|Application:||Wellhead Flange Wireline Pressure Control Equipment Alloy Steel||Size:||2.5inch ID 3inch ID 4inch ID 5inch ID|
|Material:||Alloy Steel&Nickel Alloy||Connection Type:||O&B|
|Function:||Allows For Only The Joint That Was Broken To Be Tested, Without Filling The Whole Lubricator System||Work Pressure:||3k 5k 10k 15k|
Wireline Pressure Control Wellhead Flange,
2.5 Inch ID Wellhead Flange,
Alloy Steel Wellhead Flange
Wellhead Flange Wireline Pressure Control Equipment Alloy Steel
Wireline Wellhead Flange Wireline Pressure Control Equipment
The wellhead flange is used to connect the tubing pin with the wellhead, with the upper part connected to the tubing pin and the lower part
connected to the wellhead. The wellhead flange is connected by bolts and nuts. When in use, the gasket is placed between the sealing surfaces.
After the nut is tightened, the specific pressure on the gasket surface reaches a certain value, and then the gasket is deformed, and the uneven
part on the sealing surface is filled, so that the connection is tight without leakage.
II the pressure test:
The wellhead flange shall be periodically tested for compressive strength, and the test pressure shall be 1.5 times of the working pressure.
1. Install the pressure test joint and connect the pressure test pipeline;
2. Start the pressure test pump for pressure test: press it to the test pressure, hold it for 15 minutes without leakage, and fill in the test record card.
III. Routine maintenance:
1. The pressure test shall be conducted regularly;
2. When temporarily not in use, it should be stored with silk protector.
Welcome to contact us at any time.
Contact Person: Selina Qiang
Tel: 86 13571793445