|Place of Origin:||China Baoji|
|Model Number:||1.25inch,1.5inch 2inch 2.5inch.3inch,4inch|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Box|
|Delivery Time:||3-4 weeks|
|Payment Terms:||T/T, Western Union|
|Supply Ability:||1 set 3 weeks|
|Name:||2 Inch B Type Pulling Tools Wireline Pulling Tool||Size:||1inch—3inch|
|Material:||Material Aluminum Alloy||Fish Neck:||0.75inch,1.187inch 1.375inch 1.75inch 2.313inch|
|Connection:||5/8UN 15/16UN 1-1/16UN||Function:||To Retrieve Subsurface Devices With Different Fishing Neck Reach.|
Aluminum Alloy Wireline Pulling Tool,
5/8UN Wireline Pulling Tool,
B Type Wireline Pulling Tool
2 Inch B Type Pulling Tools Wireline Pulling Tool
B-type fishing tools are divided into two types, "BB" and "BE". The BB type has short jaws, so the grab distance is short; the BE type has long jaws, so the grab distance is long. These two types are exactly the same except for the length of the claws, and can be interchanged by changing the claws.
II. Technical parameters and specifications:
|Size||A D||Fishing||Connection||Grip||Grab diameter|
III. Structural features and use:
B-type fishing tool is composed of upper joint, outer cylinder, lock cap, mandrel, spring, claw and so on.
The upper end of the upper joint is equipped with a standard outer fishing neck, which is used to connect to the lower part of the basic tool string. After the fishing tool is installed with a pin, the claw is in the retracted position; pass and grasp the fishing neck in the well, and evenly pull the wire rope upward. Do not use excessive force during the lifting process to prevent the pin from being cut and the jaws to be released.
After the salvage is completed, the shear pin is shaken upwards, the upper joint and the outer cylinder are pulled upwards, and the claws are opened under the action of the spring, and the hands are released.
IV, assembly and disassembly:
1.1 Put the mandrel into the outer cylinder and screw on the lock cap 3 to 4 turns;
1.2 Install the spring and claw, the top of the claw is in the outer cylinder, and the bottom is in the slot of the mandrel;
1.3 Align the pin holes of the mandrel and the outer cylinder, and install the pins;
1.4 Use a vise to tighten the outer cylinder and tighten the lock cap;
1.5 Tighten the upper joint.
2.1 Use a vise to tighten the outer cylinder and remove the upper joint;
2.2 Remove the lock cap;
2.3 Take out the mandrel, spring and jaws;
2.4 Punch out the pin.
V, matters needing attention:
1. When assembling, check whether each piece is damaged and replace it in time.
2. When using, carefully check whether the parts are connected well.
3. When not in use temporarily, apply lubricating oil to the thread and place it with a protective wire.
Welcome to contact us at any time.
Contact Person: Selina Qiang
Tel: 86 13571793445