Pump-In-Tee Wireline Pressure Control Equipment.IntroductionThe Pump in tee is attached below the BOP,The pump in tee connection thread is used to connect the wellhead manifold to provide a path for large flow. ... Read More
2.25 inch FB-2 Equalizing Check Valve Wireline Lock Mandrel I. Overview: FB-2 Equalizing Check Valve is actually a one-way plug, which can only withstand the pressure difference between the upper and lower. ... Read More
Wireline Pressure Control Equipment Alloy Steel Wellhead Flange I. Overview The wellhead flange is used to connect the tubing male buckle and the wellhead, the upper part is connected to the tubing male buckle, ... Read More
Wireline Pressure Control Nickel Alloy Wellhead Flange 6B(2-9/16) I. Overview The wellhead flange is used to connect the tubing male buckle and the wellhead, the upper part is connected to the tubing male ... Read More
Wireline Lock Mandrel PXX plug and prong Running Tool 2.813 inch I.Product overview The Type PX X Plug is a positive plug used in conjunction with the Type X X Landing Nipple. This plug might be used to test ... Read More
Cutter Bar Type Go Devil Wireline Fishing Tool 1.5inch I Overview The Cutter Bar Type Go Devil is used to cut the stuck tool string wire. The diagonal bottom wire cutter is composed of a solid bar with a groove ... Read More
105MPa Chemical Injection Valve Injection Sub Wireline Pressure Control Equipment I. Overview: The chemical injection sub is designed to apply a deicer or corrosion inhibitor to the wire (cable) during a ... Read More
GS Type Pulling Tool Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is usually is used to throw and ... Read More
1.5 Inch Supported Roller Centralizer Wireline Tool String Wireline Supported Roller Centralizer Wireline Tool String I.Overview The Supported Roller Centraliser is designed for use with slickline toolstring or ... Read More
Tubing End Locator Wireline Tool String .Introduction The tubing end locator, as the name suggests, is a tool used to accurately measure the depth of tubing. This type of locator is positioned at the end of the ... Read More