Send Message
Tel:
Ruixin Energy Equipmnet
Ruixin Energy Equipmnet

Innovation Excellence

Home ProductsWireline Pulling Tool

2 inch and 2.5 inch Inch R Type Wireline Pulling Tool Alloy Steel API approved

2 inch and 2.5 inch Inch R Type Wireline Pulling Tool Alloy Steel API approved

  • 2 inch and 2.5 inch Inch R Type Wireline Pulling Tool Alloy Steel API approved
2 inch and 2.5 inch Inch R Type Wireline Pulling Tool Alloy Steel API approved
Product Details:
Place of Origin: China Baoji
Brand Name: Ruixin
Certification: API
Model Number: 1.5inch 2inch 2.5inch,3inch,4inch
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Wooden Box
Delivery Time: 2-3 weeks
Payment Terms: T/T
Supply Ability: 1 set 2 weeks
Contact Now
Detailed Product Description
Name: 2 Inch And 2.5 Inch R Type Pulling Tool Wireline Pulling Tool Size: 1.5inch 2inch 2.5inch,3inch,4inch
Fish Neck: 1.375inch, 1.75inch, 2.313inch ,3.125inch Material: Alloy Steel&Nickel Alloy
Actual OD: 1.43inch,1.77inch,2.18inch,2.74inch,3.718inch To Engage Size: 1.187inch 1.375inch, 1.75inch, 2.313inch ,3.125inch
Connection: SR QLS HDQRJ, BLQJ
High Light:

R Type Wireline Pulling Tool

,

Wireline R Pulling Tool

,

API Wireline Pulling Tool

2 Inch and 2.5 inch R Type Wireline Pulling Tool Alloy Steel API approved

 

R Type Pulling Tool Wireline Pulling Tool

I. Introduction: 

A R type pulling tool is an outer pulling tool, which can grasp the shoulder of the outer fishing neck with special fishing claw and move upward to release the claw, and which is divided into three types: RB, RS and RJ.

II. General Technical Parameters: 

Size Actual OD Fishing neck Connection Grasping diameter PN.
1.5" 1.43" 1.187" 15/16-10UN 1.187" W31-01.03.00
2" 1.77" 1.375" 15/16-10UN 1.375" W31-01.01.00
2.5" 2.18" 1.375" 15/16-10UN 1.75" W31-01.02.00
3" 2.74" 2.313" 1-1/16-10UN 2.313" W31-01.04.00
4" 3.718" 2.313" 1-1/16-10UN 3.125" W31-01.05.00

Note. Pay attention to the model of grasping distance when ordering goods, More customized parts are available upon request.

III. Structural features: 

There are some grooves distributed uniformly on the outer cylinder; the fishing claw is installed on the groove and shrunk under the function of secondary spring and spring seat; the mandrel is fixed with outer cylinder with shear pin to connect with the bottom of the upper contact.

While fishing, the outer fishing neck will enter into the outer cylinder to drive the fishing claw to move up, and then the fishing claw will splay under the function of the slope of outer cylinder and fishing claw; after continuing to move the outer fishing neck up, the fishing claw will reset under the function of secondary spring, and then grasp the out fishing neck immediately; at this moment, the outer cylinder and fishing claw are bearing the strength of the object to be fished at the bottom, and is connecting with the basic tool string on the top with the shear pin installed on the mandrel. When the tool moves upward, the shear pin will be cut off; the mandrel will be pulled up under the function of main spring, and the big step of the mandrel will pull the fishing tool to move up and splay to complete releasing.

IV.  Notes:

1. Before lowering the tool, inspect whether the connection threads of the tool are loose.

2. Maintain it in time after use.

Tools Can Be Manufactured To Any Size Required.  Welcone to contact us at any time.

2 inch and 2.5 inch Inch R Type Wireline Pulling Tool Alloy Steel API approved 0

Contact Details
Ruixin Energy Equipmnet

Contact Person: Selina Qiang

Tel: 86 13571793445

Send your inquiry directly to us
Ruixin Energy Equipmnet
Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Tel:00-86-13571793445
Mobile Site Privacy Policy | China Good Quality Wireline Tool String Supplier. © 2021 - 2024 rxwirelinetools.com. All Rights Reserved.