|Place of Origin:||China Baoji|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Box|
|Delivery Time:||3-4 weeks|
|Supply Ability:||1 set 3 weeks|
|Name:||Shock Absorber Wireline Pressure Gauge Hanger||Size:||1.25inch-2.5inch|
|Fishing Neck:||1.187inch-2.3135inch||Upper Connection:||15/16-10UN|
|Lower Connection:||3/4-16UN||Material:||Alloy Steel&Nickel Alloy|
2.5 Inch Wireline Downhole Instrument Hangers,
Alloy Wireline Downhole Instrument Hangers,
API Wireline Downhole Instrument Hangers
Shock Absorber Wireline Pressure Gauge Hanger
In the wire work, the shock absorber is used to reduce the vibration transmitted to the instrument when running in.
The shock absorber is basically composed of a salvage neck, a cylinder, an auxiliary spring, a mandrel, a main spring, a plug cap, and a lower joint. The main spring is stronger because it has to bear the weight of its lower instrument and is in a constant compression state. The mandrel moves between the springs and absorbs shocks, thereby protecting the downhole state of the instrument.
II. Technical parameters:
|Size||Fishing neck||upper Connection||Lower Connection|
III. Structural features and use:
The shock absorber is mainly composed of a salvage neck, a cylinder, an auxiliary spring, a mandrel, a main spring, a plug cap, a lower joint, etc. The specific structure is shown in the attached drawings.
When going down the well, the tool string is connected, and the lower part is connected to the instrument. The mandrel of the shock absorber moves between the two springs and absorbs the shock, so as to protect the downhole state of the instrument.
IV, matters needing attention:
1. When using, carefully check whether the parts are well connected and whether the mandrel can be moved, in case the shock absorber cannot be used after going down the well.
2. When not in use temporarily, apply lubricating oil to the thread and place it with a protective wire.
Welcome to contact us at any time.
Contact Person: Selina Qiang
Tel: 86 13571793445