|Place of Origin:||China Baoji|
|Model Number:||1.25inch,1.5inch 2inch 2.5inch.3inch,4inch|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Box|
|Delivery Time:||2-3 weeks|
|Payment Terms:||T/T, Western Union|
|Supply Ability:||1 set 2 weeks|
|Name:||3 Inch JDC Type Slickline Pulling Tools Material Aluminum Alloy||Material:||Material Aluminum Alloy|
|Size:||1.25inch—4inch||Fish Neck:||1.187inch 1.375inch 1.75inch 2.313inch,3.125inch|
|Connection:||SR,QLS,BLQJ,HDQRJ||To Engage Size:||0.875inch,1.187inch 1.375inch 1.75inch 2.313inch,3.125inch|
|Function:||To Retrieve Subsurface Devices With Different Fishing Neck Reach.|
JDC Type Pulling Tool Slickline,
3 Inch Alloy Well Fishing Tools,
Wireline Well Fishing Tools
3 inch JDC Type Pulling Tool Wireline Pulling Tool Material aluminum alloy
JDC Type Pulling tools are a tool or instrument (such as balance rod, plug, pressure gauge, etc.) that can be put, salvage. It can be shocked down. Different from the gripping spacing can be divided into three kinds of JDC, JDS and JDL.
II, the commonly used specifications and technical parameters:
|Size||A D||Fishing||Connection||Grab diameter|
III, ,structure characteristics
JDC Type Pulling tools consist of upper joints, closures, main springs, auxiliary springs, mandrels, slides, outer cylinders, salvage claws, cutings, etc.The upper end of the upper connector has a standard salvage neck, which is used to connect to the lower part of the basic tool string; the lower end has an internal thread, which is connected to the outer cylinder, which constitutes the carrier body of the delivery tool.
The outer cylinder and salvage claw are key components of the delivery tool. The salvage claws are in a shrinkage position under the action of the auxiliary spring; when the salvage tool enters the outer tube, the salvage jaw upward, due to the raw effect of the outer cylinder and salvage claws, The salvage jaw opens the grouper to grasp the tools.
The outer cylinder and the salvage claw are mounted; the mandrel is secured to the outer cylinder with a shearing pin, and is equipped with a main spring and a clip. When the shear is cut, since the main spring force is much larger than the auxiliary spring force, the mandrel is upward, The slider is pulled to open the salvage claw.
IV. disassembly and installation:
1. Remove (replace the cut-up):
1.1 Clamp the outer cylinder on the flying pliers, unscrew the upper connector;
1.2 Remove the auxiliary spring;
1.3 Removing the tight screw on the clip, screw the clock;
1.4 Remove the main spring, mandrel and slider, and rush down;
1.5 is pulled out of the fish.
2.1 Wrap the salvage claws on the outer cylinder, so that the salvage claw is aligned with the outer tube;
2.2 Push the salvage claw into the outer cylinder, and check whether the activity is free;
2.3 Wipe the slider with a word screwdriver to put the seal fat from the inside of the outer cylinder to the salvage claw;
2.4 Insert the mandrel;
2.5 Clips the outer tube with the tiger plugging, put on the main spring and the clip;
Welcome to contact us at any time.
Contact Person: Selina Qiang
Tel: 86 13571793445