Grease Injection Head With Stuffing Box 0.125inch-105MPa Wireline Equipment I.Overview Grease Injection Head With Stuffing Box is a surface pressure control device used to lubricate cables (or wire) and seal ... Read More
105MPa Chemical Injection Valve Injection Sub Wireline Pressure Control Equipment I. Overview: The chemical injection sub is designed to apply a deicer or corrosion inhibitor to the wire (cable) during a ... Read More
Wireline Knuckle Joint 1.5inch PCE Wireline Tool String H2S Service Wireline I.Overview: The Wireline Knuckle Joint is a ball-shaped design that can achieve the Angle deflection between the jar and the pulling ... Read More
2.25 inch N-Test Tool Running Tools Wireline Tools Lock Mandrel I.Overview The N-Test Tool is used to pressure test the line above the threaded joint mounted in it. The tool is designed to maintain only the ... Read More
Mono-Conductor Tungsten Filled Stem E-line Tungsten Filled Stem H2S Standard 1-11/16inch 7FT I.Overview The Mono-Conductor Tungsten Filled Stem Bar is used to provide the mass required to enable the downhole ... Read More
Mono-Conductor Supported Roller Centralizer 2-3/4 H2S Standard Wireline Tools Product Overview The Mono-Conductor Arm Roller Centralizer is acompact, inline, and low-frictionroller centralizer designed ... Read More
Half Moom Flange Wellhead Adapter 35MPA Wireline Pressure Control Equipment Product overview The half moon flange wellhead is used to connect the tubing thread pin and the wellhead, the upper part is connected ... Read More
Hydraulic Tool Catcher 70Mpa 10K H2S Wireline Pressure Control Equipment Overview The hydraulic tool catcher is composed of a body, a mandrel, a fish claw, a lower joint, a nonnut, a guard plate, a piston, a ... Read More
BOP Hydraulic Control System H2S 70Mpa 10K Wireline Pressure Control Equipment Overview A Blow out Preventer (BOP), which is connected to a wellhead adapter or the top of an oil tree. Closing the BOP while the ... Read More
Wireline W Running Tools 1.5inch 4inch Insert "C", "B", and "W" lock mandrel or plugs. Product overview The W-type running tool is used to insert "C", "B" and "W" lock mandrel or plugs into the tubing. It is ... Read More