Tel:
Baoji Ruixin Energy Equipment Co.,Ltd
Baoji Ruixin Energy Equipment Co.,Ltd

Innovation Excellence

Home ProductsWireline Lock Mandrel

Wear Resistant Wireline Lock Mandrel HFH Type Running Plug

Wear Resistant Wireline Lock Mandrel HFH Type Running Plug

  • Wear Resistant Wireline Lock Mandrel HFH Type Running Plug
Wear Resistant Wireline Lock Mandrel HFH Type Running Plug
Product Details:
Place of Origin: China Baoji
Brand Name: Ruixin
Certification: API
Model Number: 2.813inch 3.813inch
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Wooden Box
Delivery Time: 2-3 weeks
Payment Terms: T/T
Supply Ability: 1 set 2 weeks
Contact Now
Detailed Product Description
Name: Wireline Lock Mandrel HFH Plugs Size: 2.813inch 3.813inch
Lock Cylinder Salvage Diameter: 2 Inch-4 Inch Balance Bar Fishing Neck: 1.375inch-3.125inch
Balance Bar Fishing Tool: 2inchSB-4inchSB
High Light:

HFH Wireline Lock Mandrel

,

HFH Type Wireline Running Plug

,

Wear Resistant Mandrel Running Plug

 

 

Wireline Lock Mandrel HFH plugs

I. Overview:
The HFH type plugs is sealed at the designated position of the working cylinder by the sealing assembly, so that the pressure under the HFH type plug is sealed, and there is no pressure above the HFH type plug to ensure the safe operation of the wellhead.
II. Common technical parameters:

 

 Size   Lock cylinder salvage diameter   Balance bar fishing neck  Balance bar fishing tool
1.875" 2" 1.375" 2"SB
2.313" 2.5" 1.375" 2"SB
2.813" 3" 1.375" 2"SB
3.813" 4" 3.125" 4"SB


III. Structural characteristics:
HFH plugs is composed of inner salvage neck, nut, retaining ring, elastic retaining ring, outer cylinder, sealing assembly, lock cylinder key, etc.
When the HFH type plug is downhole, the key of the lock cylinder is retracted and will not be seated; when it reaches the predetermined position, the plug cannot be moved down, so it is jarred down slowly to make the plug firmly seated, and then the type A is cut off by jarring downward. After lowering the shear pin of the tool, continue to lower the key, the lock cylinder key will be propped up under the action of the inner salvage neck cone surface, continue to lower the A-type lowering tool, the lock cylinder of the A-type lowering tool is recovered, jarred upwards, and cut off Insert the shear pin of the tool and pull out the tool.
When the HFH type plug is unsealed, put in the GS casting and fishing tool + recovery probe, after the salvage claw grabs the salvage neck in the HFH type plugs, continue to shock downward to break the broken pin, and after the pressure is balanced, shock upward Press the key of the lock cylinder to recover, continue to lift, and take out the tool.

IV.Matters needing attention:
1. Before going downhole each time, check that the lock cylinder key can shrink freely without jamming, and replace the broken pin.
2. Check the sealing assembly to ensure that the sealing assembly is intact (if damaged, replace it in time).

Welcome to contact us at any time.

Wear Resistant Wireline Lock Mandrel HFH Type Running Plug 0

 

Contact Details
Baoji Ruixin Energy Equipment Co.,Ltd

Contact Person: Selina Qiang

Tel: 86 13571793445

Send your inquiry directly to us
Other Products
Baoji Ruixin Energy Equipment Co.,Ltd
401B, High-end Equipment Industrial Park, Baoji High-tech Development Zone, Shaanxi Province
Tel:00-86-13571793445
Mobile Site Privacy Policy | China Good Quality Wireline Tool String Supplier. © 2021 - 2022 rxwirelinetools.com. All Rights Reserved.